?Are you trying to decide if the PINTY 6-24×50 AO Rifle Scope with Dual 1″ Scope Mount Rings for 20mm Picatinny Rail is the right optic for your rifle, shotgun, air rifle, or airsoft setup?
This image is property of Amazon.com.
What this product claims to offer
You’ll find the full product name a mouthful, but it does tell you a lot about what you’re getting. The PINTY 6-24×50 AO Rifle Scope with Dual 1″ Scope Mount Rings for 20mm Picatinny Rail, Hunting Rifle Scope Rangefinder Mil Dot with RG Illuminated Optics, Shotgun Air Rifle Airsoft Scope promises a versatile, all-purpose optic with long-range capability and illumination.
You should expect a 6–24x magnification range, a 50mm objective lens for improved light gathering, adjustable objective (AO) for parallax control, and a second focal plane (SFP) mil-dot reticle with red/green illumination. PINTY includes dual 1″ rings for Picatinny rails and advertises rugged construction with full multi-coatings, nitrogen filling, and weather resistance.
Quick specification breakdown
Here’s a concise specification table so you can see key features at a glance. You can use this to compare specs with other scopes or to confirm compatibility before purchase.
| Feature | Specification |
|---|---|
| Magnification | 6x to 24x |
| Objective Lens | 50 mm |
| Reticle | Etched-glass mil-dot, Second Focal Plane (SFP) |
| Illumination | Red/Green selectable, 5 brightness levels |
| Adjustment Clicks | 1/4 MOA per click |
| Parallax/AO | Adjustable objective (AO) for parallax correction |
| Tube Diameter | 1 inch |
| Included Mounts | Dual 1″ scope mount rings for 20mm Picatinny rail |
| Construction | Aluminum alloy tube, anodized finish, nitrogen filled |
| Weatherproofing | Water-resistant, fog-proof, shock-proof |
| Lens Coating | Fully multi-coated |
| Accessories | Flip-up lens covers |
| Manufacturer Support | PINTY warranty and 24/7 customer service (stated) |
You’ll appreciate having that table handy when making compatibility or performance comparisons. It lays out the essentials so you don’t have to hunt through long descriptions.
Optical performance and clarity
Optics are the heart of any scope, and the PINTY 6-24×50 AO does a respectable job for its price point. The 50mm objective pulls in more light than smaller objectives, which helps in low-light conditions like early morning or dusk.
You’ll notice good edge-to-edge clarity at mid-range magnifications. At the highest magnification (24x) you may see some chromatic aberration or slight softness at the extreme edges, which is common in scopes within this budget. Still, for hunting and target shooting, the image quality is more than adequate.
Reticle and illumination
The etched-glass mil-dot reticle is placed on the second focal plane (SFP), which means the subtensions are accurate only at the scope’s highest magnification or are calibrated for a specific magnification — check behavior in practice for your use. You’ll like having mil-dots for estimating range and compensating for holdover.
You can switch between red and green illumination and select from five brightness levels. That flexibility helps you adapt the reticle to ambient conditions and reticle contrast requirements. Even when illumination is off, the etched reticle remains visible.
Low-light performance
The 50mm objective and fully multi-coated lenses improve low-light performance, helping you see more detail during dawn and dusk. You’ll still be limited by the quality of the glass and coatings compared to premium optics, but for most hunters and recreational shooters, it’s a noticeable benefit.
You should remember that extreme low-light scenarios will expose limitations relative to high-end optics, but the PINTY scope gives you usable images in the typical shooting windows for hunting.
Mechanical build and durability
PINTY markets the scope as rugged, and you’ll find the build quality solid for a budget-to-midrange optic. The aluminum alloy tube is lightweight and the anodized finish resists corrosion and wear.
The scope body is hermetically sealed and nitrogen-filled, which helps prevent internal fogging and keeps moisture out during wet conditions. The scope also claims shock-proof performance suitable for standard recoil from rifles, shotguns, and other platforms listed in the product name.
Mounting hardware and included accessories
Two 1″ rings for a 20mm Picatinny rail are included, so you won’t need to buy mounting rings separately if you have a standard pic rail. Flip-up lens covers are also included and they are handy for protecting lenses in the field.
You’ll want to double-check ring alignment and torque settings during installation to ensure no stress on the scope tube. The included rings work well for many users, but if you prefer one-piece mounts or higher rings for specific platforms, you may opt to upgrade.
Weatherproofing and field reliability
Because the scope is nitrogen-filled and sealed, you can trust it to handle rain and cold without internal fogging. The anodized exterior and alloy construction add to durability during normal use.
You should still avoid extreme abuse and keep the scope clean and mounted properly — no optic is indestructible. For the expected price bracket and intended applications, the PINTY performs reliably in typical hunting and range conditions.
This image is property of Amazon.com.
Adjustments: windage, elevation, parallax, and diopter
You’ll be able to fine-tune your zero and maintain accuracy with the PINTY’s turrets and adjustments. The windage and elevation turrets click at 1/4 MOA per click, which gives you good granularity for mid- to long-range adjustments.
The adjustable objective controls parallax from close ranges out to long ranges, improving accuracy when shooting at varying distances. The fast-focus diopter lets you sharpen the reticle to suit your eye, which is essential when others share your rifle or when your eyesight shifts.
Click feel and repeatability
The turret clicks are audible and tactile. You’ll notice a clear “click” with each adjustment, making on-the-fly changes easier. Repeatability is decent; after several adjustments and returning to zero, many users find the scope holds its settings well.
You should still verify zero after transport or heavy recoil and use a reliable method (like a boresight followed by live-fire confirmation) when establishing zero for any serious application.
Parallax adjustments and practical accuracy
The AO is effective for minimizing parallax error, especially at the closer ranges typical to air rifles and shotguns. When you use higher magnifications at long range, you’ll appreciate how the AO keeps the target and reticle on the same focal plane.
You will need to practice adjusting the AO under varying conditions to get fast and consistent results, but it performs as expected for the class of scope.
Ergonomics and shooting comfort
Ergonomically, the scope balances well with many rifles thanks to its lightweight aluminum tube. Eye relief is generous enough to be safe on many calibers, though you should verify specifics with your individual firearm.
The magnification ring is reasonably smooth and easy to operate, even with gloves. The illumination control is intuitive, and the flip-up caps protect the lenses without adding complexity.
Eye relief and field of view
At lower magnifications you’ll enjoy a wider field of view, which helps when tracking moving targets or scanning terrain. At maximum magnification, the field of view narrows, but you gain precision for longer shots.
You’ll want to ensure proper eye relief to avoid scope eye — set your mounts and cheek weld so you have consistent eye position for repeatable shots.
This image is property of Amazon.com.
Suitability for various platforms
The product title lists multiple platforms — hunting rifle, shotgun, air rifle, airsoft, crossbow — and the PINTY 6-24×50 AO is versatile enough for many of those uses. The included Picatinny-compatible rings make it straightforward to mount on typical rails.
For hunting rifles and target rifles you’ll find the magnification range useful for everything from close stalking to long-range shots. For air rifles and airsoft, the AO and magnification range work well for paper targets and precision shooting. For shotguns and crossbows, you’ll need to be mindful of recoil and mounting height, but many users adapt this scope successfully.
Practical examples of use
If you hunt whitetail at dawn or shoot steel at 200–300 yards, the 6–24x range gives you flexibility. If you shoot backyard plinking or airsoft, you can dial down magnification for situational awareness and switch to higher magnification for precision target shots.
You should match mount height and rings to the platform to retain a comfortable and consistent cheek weld and sight picture.
Field testing impressions
After practical use on the range and in typical hunting scenarios, you’ll notice a few recurring themes: good value for the optic’s price point, reliable adjustments, and useful illumination. Targets are easier to identify at mid-range and you can make consistent windage/elevation corrections.
One area to monitor is optical clarity at 24x — atmospheric conditions and lens limitations can affect crispness. Also, you may prefer upgrading rings or mounts for high-recoil rifles or for enhanced alignment consistency.
Zeroing procedure and tips
Start by boresighting the rifle to get the reticle on paper near your target’s center. Then fire groups at a known distance (25–50 yards) and make coarse adjustments to get on paper. Move to your desired zero distance (100 yards is common) and fine-tune using 1/4 MOA clicks.
You’ll want to record adjustments and confirm repeatability after the scope has been transported or after several rounds of shooting. Tighten rings to recommended torque, and avoid overtightening to prevent tube distortion.
This image is property of Amazon.com.
Pros and cons summary
Here are the main advantages and limitations to consider. This helps you weigh whether the PINTY suits your priorities.
Pros:
- Wide magnification range (6–24x) for versatility.
- Large 50mm objective for improved low-light performance.
- Mil-dot SFP reticle with red/green illumination and five brightness levels.
- Adjustable objective for parallax correction.
- Included 1″ Picatinny rings and flip-up covers.
- Nitrogen-filled, sealed, and anodized for weather resistance.
- Good value for budget-conscious shooters.
Cons:
- Edge clarity and chromatic aberration at max magnification compared to premium glass.
- One-inch tube limits use of large-diameter aftermarket rings or certain accessories; won’t accept some high-end 30mm-only mounts.
- Included rings are serviceable but some users may prefer higher-quality or one-piece mounts.
- Illumination battery life and electronics robustness can vary by unit.
You’ll want to balance those trade-offs based on whether you prioritize price, durability, or top-tier optical performance.
How it compares to similar scopes
Compared with other budget to midrange 6–24x scopes, the PINTY performs competitively. It’s similar in functionality to other “value” scopes that offer AO, illuminated reticles, and multi-coated lenses.
You’ll get more features than entry-level optics that lack AO or illumination, while paying less than premium brands with higher-grade glass and more refined turrets. If you prioritize a feature-rich scope without a premium price tag, this is a reasonable choice.
When you might upgrade to a pricier scope
If you need absolute edge-to-edge clarity at 24x, elite low-light performance, or a 30mm tube for more internal elevation travel and sturdier mounts, you’ll consider stepping up to a higher-tier optic.
You should upgrade if you demand sub-MOA internal quality across the entire image, ruggedized turrets with zero-stop features, or brand-specific lifetime warranties and service networks.
This image is property of Amazon.com.
Mounting and setup checklist
To get the best results from the PINTY scope, follow this practical checklist for mounting and setup. Doing this right will save you time and increase accuracy.
- Confirm rail compatibility with included 1″ rings (20mm Picatinny).
- Bore-sight before live firing to reduce time on the range.
- Use a level to ensure scope is not canted when tightening rings.
- Torque ring screws evenly to recommended specs (use a torque wrench if possible).
- Set diopter for a crisp reticle before zeroing.
- Adjust the AO for the range you plan to zero at to reduce parallax.
- Fire groups and adjust windage/elevation using 1/4 MOA clicks.
- Recheck zero after several shots and after transport.
You’ll be rewarded with a quicker zeroing process and better repeatable accuracy when you follow these steps.
Maintenance and care
Keep the lenses clean with a soft microfiber cloth or lens brush to avoid scratching the coatings. Avoid harsh chemicals; use lens cleaner designed for optics.
You should check mounts and screws periodically to ensure nothing has loosened after shooting sessions. Store the scope in a cool, dry place and remove batteries when storing long-term to avoid leakage.
Battery and illumination maintenance
The two-color illumination requires a small battery (usually CR2032 or similar). Replace batteries with quality cells for consistent brightness and longer service life. Turn illumination off when not needed to conserve battery.
You should test illumination before any hunt or competition so you’re not surprised by a dead battery in the field.
Frequently asked questions (FAQs)
You’ll likely have a few common questions about compatibility and performance. Here are concise answers to frequently asked items.
Q: Is the mil-dot reticle usable at all magnifications? A: Because the reticle is on the second focal plane, holdover values will be accurate only at the magnification for which the reticle is calibrated. Practice with your scope to learn its behavior.
Q: Can this scope handle high-recoil rifles? A: It’s advertised as shock-proof and many shooters use it on moderate-recoil rifles. For very high-recoil calibers, consider upgrading to a heavy-duty mount and verify the scope’s performance on your specific firearm.
Q: Are the included rings high-quality? A: The included dual 1″ rings are functional and save you money, but some users prefer aftermarket one-piece or higher-grade rings for better alignment and stability.
Q: Is the scope suitable for crossbows? A: Yes, with consideration for mount height and recoil type. Make sure your crossbow’s recoil is compatible and that you set a proper cheek weld for consistent eye relief.
You’ll find that testing the scope on your intended platform is the best way to confirm suitability.
Who this scope is best for
This scope is well-suited for you if you want an affordable, feature-rich optic that covers a range of shooting activities. It’s ideal for weekend plinkers, new hunters, target shooters, and airgun enthusiasts.
You’ll benefit from the AO and illumination when shooting in low-light or variable conditions. If your priorities include premium glass and elite turrets, you might look higher, but for value and functionality this scope delivers well.
Buying considerations
Before you buy, verify that:
- Your firearm or platform accepts 1″ tube rings and Picatinny rails.
- You’re comfortable with SFP reticle functionality.
- You understand the limitations of budget optics versus premium optics.
You should also confirm return policies and warranty information from the retailer and PINTY in case the unit arrives with defects or fails to meet expectations.
Warranty and customer support
PINTY states they back the scope with customer service and a warranty. You’ll want to confirm the exact terms and length of coverage with the seller and keep your proof of purchase.
If you run into issues, contact PINTY’s support for troubleshooting, warranty claims, or replacement information. Keep serial numbers and purchase receipts handy for a smoother process.
What to do if something goes wrong
If the scope arrives damaged or fails early, document the issue immediately and reach out to seller support. Many common issues can be resolved with an exchange or replacement battery, but persistent optical or mechanical failures should be handled under warranty.
You’ll find that prompt contact and clear photos/descriptions often speed resolution.
Final verdict and recommendation
If you want a versatile optic that balances price and performance, the PINTY 6-24×50 AO Rifle Scope with Dual 1″ Scope Mount Rings for 20mm Picatinny Rail, Hunting Rifle Scope Rangefinder Mil Dot with RG Illuminated Optics, Shotgun Air Rifle Airsoft Scope is a solid choice. It gives you a wide magnification range, useful features like AO and illumination, and practical mounting options out of the box.
You should buy this scope if you prioritize features over boutique glass and need a scope that can work across multiple platforms. If you demand the absolute best optical performance or have heavy-recoiling rifles that require premium mounts, you might consider spending more on a higher-tier optic.
Practical buying tips
When purchasing, check seller ratings and return policies. Inspect the scope upon arrival, test illumination and adjustments, and perform a quick bore-sight before attempting live-fire zeroing. Consider a separate, higher-grade mount if you plan on heavy recoil or want maximum stability.
You’ll likely find this scope gives you a lot of utility for the price, and with careful setup and maintenance, it can serve reliably for years of shooting and hunting.
Final notes
You’ve now got a comprehensive look at what the PINTY 6-24×50 AO Rifle Scope with Dual 1″ Scope Mount Rings for 20mm Picatinny Rail offers and how it performs in real-world scenarios. Use the information here to match the scope to your needs, and don’t hesitate to test the unit on your rifle to make sure it meets your expectations.
You should feel confident making a decision based on how you plan to use the optic and whether its trade-offs match your priorities.
Disclosure: As an Amazon Associate, I earn from qualifying purchases.